Easy PocketNAV.com OnCourse Navigator 5 User Manual Download Page 28

Page: 28 / 135

User's manual OnCourse Navigator 5

- 26 -

Hardware keys

3.1

Hardware keys

Key configuration

In OnCourse Navigator, you may configure the hardware keys
of your Pocket PC to execute the "Up", "Down", "Left", "Right",

"OK" and "Return" actions. This enables convenient and easy
operation.
When you quit the navigation software, the keys will have their
standard functionality.

On the main screen, tap Settings.

The S

ETTINGS

screen opens.

Via the arrow buttons, select the K

EYS

screen.

Tap Configure.

Select the keys for the respective actions.

Tap the Save button.

3.2

Software keyboard

Survey

A software keyboard appears at the bottom of the screen when

text entries are necessary. Choose between a standard keyboard,
a character keyboard or a mobile phone keyboard.

Select a software keyboard by tapping the respective icon at the
bottom of the screen. The icon of the active keyboard appears

pressed.

3.2.1

Standard keyboard

Summary of Contents for OnCourse Navigator 5








































































































































Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands

Easy PocketNAV.com OnCourse Navigator 5, User Manual

Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands