Easy PocketNAV.com OnCourse Navigator 5 User Manual Download Page 20

Page: 20 / 135

User's manual OnCourse Navigator 5

- 18 -

Installing the hardware

2.2.1

Mounting and connecting the Pocket PC

Caution: The mounted holder must not impede the driver’s
attention on the traffic.

Connecting the

Pocket PC...

Attach the cradle of the Pocket PC to the swan-neck mount.

Note: Take note of the caption on the swan-neck mount. The
arrow with the caption close must show in snap-on direction.
The connection must snap on audibly.

Place the suction cup on the windscreen. Press the lever

firmly to the windscreen before switching it.

Put the Pocket PC into the cradle. Make sure that it is held

safely!

Plug the adapter into the socket at the bottom of the

Pocket PC.

Summary of Contents for OnCourse Navigator 5








































































































































Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands

Easy PocketNAV.com OnCourse Navigator 5, User Manual

Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands