Easy PocketNAV.com OnCourse Navigator 5 User Manual Download Page 106

Page: 106 / 135

User's manual OnCourse Navigator 5

- 104 -

Adding a route point during navigation

Survey

In OnCourse Navigator the following functions are available in

navigation mode:

Adding a route point during navigation, see below

Skipping the next route point, see page 105

Blocking a route section, see page 105

Using TMC functionality, see page 106

Keeping the logbook, see page 110

7.1

Adding a route point during navigation

This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 38.

Adding a route point
during navigation…

At any moment during navigation you may add a new route point
to your itinerary. The route will be recalculated in order to make

the new route point the next destination to navigate to. The other
remaining route points will be navigated to after the new one.

Adding a route

point…

Precondition: The map is being displayed in navigation mode.
1.

Tap short on any place on the map.

Tap Set interim destination

The D

ESTINATION

screen opens.

Indicate the new route point as described in "Indicating a
destination", page 47.

Tap the Set as route point button.

The route will be recalculated in order to make the new route

point the next destination to navigate to.

Note: Select the new route point directly on the map, just as

described in "Indicating destinations on the map", page 58. Tap
the respective place and hold. From the context menu, select
Add as route point.

Summary of Contents for OnCourse Navigator 5








































































































































Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands

Easy PocketNAV.com OnCourse Navigator 5, User Manual

Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands