Easy PocketNAV.com OnCourse Navigator 5 User Manual Download Page 41

Page: 41 / 135

User's manual OnCourse Navigator 5

User modes

- 39 -

The U

SER MODE

screen appears:

Your current user mode is indicated on the Current user

mode field.

Tap Current user mode to switch to the other user mode.
The name of the user mode you want to switch to becomes
the caption of the entry field.

Tap Save to save the changes.

Note: When you switch to standard mode, a dialog window

asks you whether you want to keep the configuration changes
you have made in extended mode. This dialog window
appears even when you have not made any configuration
changes. Tap Yes if you want to keep these changes.

The U

SER MODE

screen closes and you are in the Main menu of

the user mode you have just switched to.

Summary of Contents for OnCourse Navigator 5








































































































































Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands

Easy PocketNAV.com OnCourse Navigator 5, User Manual

Search results

Summary of Contents for OnCourse Navigator 5

Reviews:

Related manuals for OnCourse Navigator 5

Brands by name

Popular brands