27 |
P a g e
4.1.3 Stop Bit (Sb)
When ENTER key is pressed from “Sb 1”, the display will start flashing ‘1’.
Default value is 1.
The following are the Stop bits available-
1 & 2.
Select as per requirement and press ‘ENTER’ button to select,and after
selection the display will show the selected stop bit.
Press Tare button to go to the next parameter.
4.1.4 Parity (Pr)
When ENTER key is pressed from “Pr n”, the display will start flashing ‘n’.
Default value is n.
The following are the parity available-
None (n), Even (E), Odd (o).
Select as per requirement and press ‘ENTER’ button to select,and after
selection the display will show the selected parity.
Press Tare button to go to the next parameter.
4.1.5 Data Out (dOUt)
When ENTER key is pressed from “dOUt n”, the display will start flashing
‘n’. Default value is n.
Using RS232 we can send Net weight or Gross weight or Tare weight
using this settings.
When we press enter key from ‘dOut n’, the display will start flashing ‘n’.
“n” (Net) is default value.
Use up or down arrow to toggle between G, n, t.