9 |
P a g e
2. User Setting (uSEr)
Long press the ‘FUNC’ key and the display will show ‘uSEr’ and press
enter key to go inside the user settings. Zero key and Tare key are
used for increment and decrement or for scrolling up and down
between the sub menus.
2.1 Display Speed (SPd)
When ENTER key is pressed from SPd 3 , the display will start flashing
‘3’. Default value is 3.
This is used to vary the display speed.
1 is the fastest and 5 for slowest.
Once the speed is chosen between 1 to 5, press ‘ENTER’
button to select, and after selection the display will come to the
previous menu.
2.2 Display Brightness (brt)
When ENTER key is pressed from “brt 3”, the display will start flashing
‘3’. Default value is 3.
This is used to vary the display Brightness.
1 is the High and 5 for Low.
Once the Brightness is chosen between 1 to 5, press ‘ENTER’ button to
select, and after selection the display will come to the previous menu.