24 |
P a g e
Here is 3 different report formats is available.
Once the report format is chosen between 1 to 3, press ‘ENTER’ button
to select,and after selection the display will go to the previous menu.
Note : This is related to print and this function is temporarily
not available.
3.7 Factory Reset (FrSt)
This is used to do the factory reset setting. After the factory reset, all the
parameters will be set to its default values or functions (Except calibration
settings).
When we press enter key from FrSt, the display will show FrSt y.
FrSt y
- Do the factory reset
FrSt n
- Do not do the factory reset
When we press enter key from FrSt y, display will show ‘Wait’ and the
factory setting will be reset ,and the display will go to the previous
menu.
3.8 Unit conversion (UC)
We can use this setting for unit conversion from default unit. The scale
default units are kg, g, and Lb (either one can be set as default unit)
When we press enter key from UC, the display will show ‘Kg-g n’. and
once again when we press enter key from kg-g n, the display will start
flashing ‘n’.