18 |
P a g e
from W1 to W9, C1 to C9 and also to NIL. When NIL is selected, no check
weighing or check counting function activate)
2. Check Counting (Ct)
When ENTER key is pressed from “CHC Ct”, the display will show
the ‘LOC W1’. Default Location is W1.
Total 9 locations are available to enter the low limit, high limit, buzzer
status, threshold value.
When ENTER key is pressed from “LOC C1”, the display will show the
‘C1 LL’.
Use Zero key for the increment and Tare key for the decrement to
scroll between LL, HL, bZ and tH.
When ENTER key is pressed from “C1 LL”, the display will show the
‘000000’. Default pieces are 000000.
Use Zero key for the increment and Tare key for the decrement and
N/G key for the shift.
Once the value is entered as per requirement, press ‘ENTER’ button to
select, and after selection the display will go to the previous menu.
When ENTER key is pressed from “C1 HL”, the display will show the
‘000000’. Default pieces are 000000.
Use Zero key for the increment and Tare key for the decrement and
N/G key for the shift.