manualshive.com logo in svg

E.T. Systems Drive 300, Installer'S Instructions, Page: 47 / 50

Share
Download
E.T. Systems Drive 300 Installer'S Instructions Download Page 47

47

User manual reference - 

Page 22

Auto-close override/party mode.  

Advanced features

This feature is useful at times when the gate must be kept open for extended periods of time. When cutting the lawn on the pavement for 

instance. With Auto-close override/party mode active any trigger on any input will simply result in the control card beeping to indicate the gate 

is being kept open intentionally. As soon as auto-close override/party mode has been deactivated, the system will resume normal operation.

Auto-close override/party mode will work in any position except the closed position.

Auto-close override/party mode is not available in condominium mode.

Action

Response

Momentary trigger 

from any transmitter 

button programmed 

into holiday lock-out 

function.

Buzzer begins toning and 

status LED comes on.

BT button while buzzer 

is sounding to confirm 

that you want to 

activate Auto-close 

override/party mode.

If no BT button is 

pressed during this 5 

second window, the 

auto-close/party mode 

status will not change.

Buzzer and status LED beep/

flash rapidly.

Any BT or PED triggers.

Gate does not move. 

Buzzer, status LED beep/

flash rapidly to confirm 

status.

Momentary trigger 

from any transmitter 

button programmed 

into holiday lock-out 

function.

Buzzer begins toning and 

status LED comes on.

BT button while buzzer 

is sounding to confirm 

that you want to 

deactivate Auto-close 

override/party mode.

If no BT button is 

pressed during this 5 

second window, the 

Auto-close override/

party mode status will 

not change.

Buzzer beeps, status LED 

reverts to gate running 

indication and gate begins 

closing.

Normal operation is now functional.

Gate in any position 

except closed.

STOP

x 5 sec.

STOP

x 5 rapid.

STOP

x 5 rapid.

STOP

x 5 sec.

STOP

x1

Summary of Contents for Drive 300



















































Reviews:

No comments