Configuration
22
© 2012 DynaGen Technologies Inc.
TOUGH Series User Manual
Operator Setup
The Operator Setup options are settings that can be changed by the end-user of the controller. These
settings are not passcode protected and do not change the way the controller interacts with the engine.
SETTING
SETTING
DESCRIPTION
Lamp Test
---
Tests the LED's by flashing them red and green to verify
they are functioning properly.
Display
LCD Reverse
Reverses the black and white of the LCD screen.
LCD Contrast
Adjusts the contrast of the LCD.
Page Scroll
Amount of time before parameter page scrolls.
Message Pop-up
Rate at which status messages display.
LCD Backlight
Amount of time before the LCD backlight turns off.
Date / Time
Date Change
Changes the day, month and year.
Time Change
Changes the second, minute and hour.
Daylight Saving
Determines if daylight savings time is enabled or disabled.
North America only.
Units
Temperature Units
Select between Celsius and Fahrenheit.
Pressure Units
Select between PSI and kPa.
Run from OFF
---
Determines if controller can be manually started while in
OFF mode.
Other Configurations
SETTING
SETTING
DESCRIPTION
Passcode
Bypass
Enables or disables the use of the passcode.
Timeout
Amount of time after the passcode is entered to remain
unlocked. Once timeout limit is reached due to inactivity
the passcode must be entered again.
Number
The desired passcode digits.
