Time Sync Server in “SYNC SERVER”. The NVR’s time clock will be synchronized with the
server by interval time set in the “TIME SYNC CYCLE”.
•
NTP Mode: “pool.ntp.org” is the recommended NTP Server. To activate, set the TIME ZONE of
your local area and then click [SYNC NOW].
•
GPS Mode: Connect USB type GPS device and click [SYNC NOW]
For the DST setting, please refer to “3.11 DST Time Setting”.
LANGUAGE
Select the display language from the available options.
VERSION
View the NVR’s current firmware version and update it to a newer version via DVD/CD/USB Memory
Stick/FTP server.
VIDEO SIGNAL
Check the right video signal (NTSC or PAL). This setting should match the [NTSC/PAL] Selection
Switch located on the rear panel. Video images might heavily shake and blink if NTSC/PAL is not
properly set.
IP ADDRESS
Shows the NVR’s current IP Address. It can be set at ‘MENU>NETWORK>NETWORK’.
AUTO IP
Shows AUTO IP Address of the NVR.
MAC ADDRESS
Shows the unique identity number for the NVR.
SERIAL
Input or edit the unit’s serial number to provide additional identification information.
SYSTEM MONITOR
Monitor the system performance and condition.
KEYPAD BEEP
Users can turn on or off the beeping sound of the keypad.
