TIME SYNC MODE
There are three types of time sync modes:
•
Server Mode: The operating NVR is set as a Time Sync Server, which can synchronize the
time other NVR(s) are connected over the same network.
•
Client Mode: Input the IP address of a designated NVR or Remote Software P/C (CMS) as a
Time Sync Server in “SYNC SERVER”. The NVR’s time clock will be synchronized with the
server by interval time set in the “TIME SYNC CYCLE”.
•
NTP Mode: “pool.ntp.org” is the recommended NTP Server. To activate, set the TIME ZONE of
your local area and then click [SYNC NOW].
•
GPS Mode: Connect USB type GPS device and click [SYNC NOW]
2.3
HDD Format
Digital Watchdog’s NVRs are shipped with pre-installed HDDs that are formatted and ready to be
used. There is no need to format the HDDs out of the box.
