User Manual | 30
Note Full PTZ functions are available by using the USB mouse, IR remote control, or keyboard
controller. The availability of functions depends on the camera’s ONVIF integration.
Consult the camera’s manual for more information.
ZOOM/FOCUS
Move zoom-in/out by rolling the wheel of the mouse up/down. If the mode is
changed to “Focus”, the camera’s focus can be controlled by rolling the wheel of
the mouse.
PRESET
When the preset menu pops up, select the preset number and click “Enter” to
move to the corresponding preset position. The maximum Preset number
supported is 255.
TOUR
Enable the TOUR function. When ‘TOUR’ is on, the camera will move to preset
positions in order. To turn the tour off, right-click on the screen and select ‘Tour’.
GUARD TOUR
When enabled, the camera will automatically switch positions according to the sequence of presets
set in the GUARD TOUR settings. See “4.2.3 PTZ” for more information.
Caution Users can set an interval for each preset position. Some presets might be skipped in case
the camera cannot mechanically move or control focus within the interval time.
GOTO HOME
The camera moves to the original position that is memorized in the PTZ device.
SETUP
Go to the PTZ setup menu (Please refer to “4.2.3. PTZ”).
PTZ EXIT
Close PTZ control mode.
3.7
Playback Recorded Images
To playback the recorded image, press the Play button on the IR remote controller or playback icon
(
) in the menu bar. When the NVR transitions to playback mode, it will automatically playback the
latest recording image.
