DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download

Page: 49 / 84

Hours total

The number of hours the generator has been run in total.

Idle control

The idle control feature lowers the RPM of the generator
when there is no load to save gas and decrease engine
noise.

When a load is applied, the engine will resume normal
speed to provide usable power.

Turn on the idle control when using intermittent loads like
power tools and air compressors.

The idle control feature is designed for gasoline only use.

Idle Control Usage

WARNING

: Power is unusable when idle control is engaged.

●

DO NOT use the idle control function when using the generator for backup house
power.

●

Idle control function will cause massive fluctuations in voltage and hertz.

●

Low amperage loads may not trigger the idle up function.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands