DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download Page 16

Page: 16 / 84

GENERATOR COMPONENTS

4. Fuel Tank

2. Air Cleaner

6. Handles

7. Battery

8. Oil Fill and Dipstick

1. Recoil Start

5. Power Panel

3. Fuel Valve

Recoil Start

– Easy pull recoil start to start the engine without the electric start.

Air Cleaner

- A removable, cleanable, oiled, element that cleans the air going into the engine.

Fuel Valve

- ON/OFF valve that allows gasoline to the fuel switch.

Fuel Tank

- All metal 7.9 gallon gasoline fuel tank.

Power Panel

- Contains the start switch, plugs, meters, and circuit breakers.

Handles

- Longest handles of any DuroMax model allow easy movement across any surface.

Battery

- 12V DC battery that powers the electric start system.

Oil Fill and Dipstick

- Use to add or check the oil.

Propane Inlet

- Provides a regulated LPG fuel supply to the engine. (Intended for use with an

LPG source of 3 psi or more.)

10.

Engine Switch

– 3 position switch to “START”, “RUN”, or turn “OFF” the generator.

11.

Charging Light

- Will light when the generator is charging the on-board battery.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands