DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download Page 33

Page: 33 / 84

Turn breaker ON/ Connect

The breaker is located on the right side of the front power

panel. Flip the breaker up to allow the power to flow to the

receptacles. Connect your devices to the receptacles on the

front panel. Start with the largest loads first.

Start the generator

The engine switch is located on the left side of the front

power panel. Press the switch up to the “START” Position.

Once the engine starts allow the switch to return to the

“RUN” position.

CAUTION

: LPG must be shut off when using gasoline!

CAUTION

: Gasoline must be shut off when using LPG!

CAUTION

: Disconnect all electrical loads from the generator before attempting to

start!

WARNING

Operating the starter motor for more than 5 seconds can damage the

motor. If the engine fails to start, release the switch and wait 10 seconds before

operating the starter again.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands