DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download Page 46

Page: 46 / 84

USING THE GENERATOR (CONTINUED)

Turn on connected devices

Start or turn on appliances, starting with the biggest loads

first.

NOTE: Be sure to attach devices to the correct receptacle (outlet).

●

120V devices can be directly connected to the 120V ONLY receptacles.

●

120V devices can be connected to the 120/240V receptacle using an appropriate adapter.

●

240V devices can ONLY be connected to the 240V receptacle.

CAUTION

: Do not connect 50 Hz or 3-phase loads to the generator.

Connecting a Load to the Generator

Plug in devices

Turn breaker ON

Plug in devices to the appropriate receptacle. When using

the generator balance the load as closely as possible. Placing

more load on one side of the circuit will reduce the breaker

trip period.

Flip the circuit breaker up to the “ON” position to allow power

to the receptacles.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands