DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download Page 38

Page: 38 / 84

STARTING THE GENERATOR (CONTINUED)

Starting the Generator Using Recoil Start

Shut breaker OFF

The breaker is located on the right side of the front power
panel. Flip the breaker down to prevent accidental load
when starting the generator.

Select your fuel

Turn engine switch to RUN

If using gasoline, see step 2 on pg. 32. If using propane see
steps 2 - 4 on pg. 34.

The engine switch is located on the left side of the front
power panel. Press the engine switch to the RUN position.

Close choke

The choke lever is located above the air filter to the left of

the recoil start. Slide the lever to the left to cut the air supply
and allow more gas into the engine to start.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands