DuroStar DUROMAX DUAL FUEL XP8500EH User Manual Download

Page: 60 / 84

Emptying the Gas Tank

MAINTENANCE AND CARE (CONTINUED)

Shut fuel valve OFF

Remove fuel filter cup

Empty fuel filter cup

Turn the fuel valve to the “OFF” position.

Remove the fuel filter cup (see “Removing the Fuel Filter Cup”

earlier in this section).

Empty the fuel filter cup of any fuel.

CAUTION

: Do not store fuel from one season

to another. Gasoline sold at the pump today

contains additives such as ethanol that even

when stored properly may damage the fuel

system components.

If you have been using gasoline in your generator, before
storing your generator for extended periods of time you
should drain your generator fuel tank of gasoline.

Summary of Contents for DUROMAX DUAL FUEL XP8500EH





















































































Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands

DuroStar DUROMAX DUAL FUEL XP8500EH, User Manual

Search results

Summary of Contents for DUROMAX DUAL FUEL XP8500EH

Reviews:

Related manuals for DUROMAX DUAL FUEL XP8500EH

Brands by name

Popular brands