Dürkopp Adler 650-16, Operating Instructions Manual

Page: 93 / 150

Control with the OP7000 control panel
Operating Instructions 650-16 - 02.0 - 08/2016 91
2. Press <No Name> and input a name.
Information for inputting text:

p. 67 .
Information
If no name is input for the seam program, <No Name> continues
to be displayed.

The first sewing step is displayed with its number in the left
pane.
3. Input all the parameters for the first sewing step.
4. Sew the first sewing step, or manually input the length of the
sewing step using the seam length measurement parameter.
5. Select the next sewing step, either by pressing on the number
of the first sewing steps or by using the knee switch.

The second sewing step is displayed with its number in the
left pane.
Fig. 60: Creating a new program (PROGRAMMING) (2)
6. Repeat step 2 until all the sewing steps have been program-
med.