Dürkopp Adler 650-16, Operating Instructions Manual

Page: 23 / 150

Operation
Operating Instructions 650-16 - 02.0 - 08/2016 21
Fig. 3: Changing the needle
To change the needle:
1. Loosen the screw (2) and remove the needle.
2. Insert the new needle into the hole in the needle bar (1) until
it reaches the end stop.
Important
The groove (4) must face towards the hook tip (3).
3. Tighten the screw (2).
Order
After changing to a different needle thickness, always adjust the
clearance between the hook and the needle
(

Service instructions ).
(1) - Needle bar
(2) - Srew (3) - Hook tip
(4) - Groove
③
④
①
②