Dürkopp Adler 650-16, Operating Instructions Manual

Page: 37 / 150

Operation
Operating Instructions 650-16 - 02.0 - 08/2016 35
Starting bartack and sewing
the seam • Push the pedal forwards and keep it there.
Starting bartack is sewn (if specified).
Then the machine sews along the seam at the speed
determined by the pedal.
In the middle of the seam
Stopping sewing • Release the pedal (position 0).
The machine stops in the 1st position (needle down) or
in the needle up position (depending on the setting
chosen).
The presser foot is down or raised
(depending on the setting chosen).
Continue sewing
(after releasing the pedal) • Press the pedal forwards.
The machine continues to sew at the specified speed.
Intermediate raising • Push the pedal half backwards.
The presser feet are raised.
• Correct the material.
• Release the pedal.
The presser feet are lowered.
Altering the fullness • Press the fullness button or the left pedal.
The selected fullness value is activated.
At the end of the seam
Remove the material to be sewn • Push the pedal fully backwards and keep it there.
The end bartack is sewn (if activated).
The thread is cut off (if activated).
The machine stops in the 2nd position.
The needle is up. The presser feet are raised.
• Remove the sewn material.
• Release the pedal.
The presser feet are lowered.