Dürkopp Adler 650-16, Operating Instructions Manual

Page: 130 / 150

Setup
128 Operating Instructions 650-16 - 02.0 - 08/2016
8.9.10 Connecting the equipotential bonding for the
setpoint transducers
Fig. 85: Connecting the equipotential bonding for the setpoint transducers
To connect the equipotential bonding for the setpoint transducers:
1. Screw the protective earth conductor (4) (500 mm long) on to
the setpoint transducer (5) (optional).
2. Lay the cable (4) through the cable duct (3) to the setpoint
transducer (2) and screw it on (optional).
3. Screw the protective earth conductor (1) (650 mm long) on to
the setpoint transducer (2) and to the control cabinet (6).
(1) - Protective earth conductor
(2) - Setpoint transducer connection
(main pedal)
(3) - Cable duct
(4) - Protective earth conductor
(5) - Setpoint transducer connection
(additional pedal)
(6) - Attachment to control cabinet
② ③ ④ ⑤
① ⑥