Dürkopp Adler 650-16, Operating Instructions Manual

Page: 73 / 150

Control with the OP7000 control panel
Operating Instructions 650-16 - 02.0 - 08/2016 71
MAN mode Setting the fullness
The following table lists the symbols and buttons for manually
setting the fullness.
To set the fullness:
1. Select the type of fullness.

The type of fullness selected is displayed in an activated
control field within the symbol.
2. If a higher or lower degree of fullness is required, use the
arrow keys to display more buttons.
3. Input the fullness using the buttons 0 to 16 .
Symbols/buttons Meaning
Inputting the fullness
The fullness setting is displayed by
a button highlighted in red.
Select the type of fullness:
• Upper (upper transport)
• Lower (lower transport)
The fullness selected is displayed in an
activated control field.
Display of further buttons for inputting the
fullness. The buttons 0 to 16 are available
for input.