Dürkopp Adler 650-16, Operating Instructions Manual

Page: 86 / 150

Control with the OP7000 control panel
84 Operating Instructions 650-16 - 02.0 - 08/2016
6.7.1 Editing existing programs (EDIT)
The following table lists the parameters that can be edited in EDIT
programming mode.
Symbols Meaning
Changing the program name
There is only one display in the EDIT
mode. A new program is automatically
assigned the next free program slot.
Select the right or left piece to be sewn
Set the sewing material size,

p. 86
Other program parameters in EDIT pro-
gramming mode,

p. 88
Set the fullness in the current sewing step,

p. 96
Set the curve support in the current sewing
step
Set the needle thread tension in the current
sewing step