Dürkopp Adler 650-16, Operating Instructions Manual

Page: 84 / 150

Control with the OP7000 control panel
82 Operating Instructions 650-16 - 02.0 - 08/2016
Changing parameters during the seam
To change parameters during the seam:
1. Move the pedal to the 0 position .
2. Change the desired parameter on the control panel.
3. Push the pedal forwards and sew.

The seam will be sewn using the altered parameter value.
Correcting the fullness before or during the seam
To correct the fullness before or during the seam:
1. Move the pedal to the 0 position .
2. Change the fullness correction using the buttons + F% or - F% .
3. Push the pedal forwards and sew.

The changed fullness value is applied and displayed.
Cancel the seam program
To cancel the seam program:
1. Push the pedal fully back.

The seam program is canceled.