Dürkopp Adler 650-16, Operating Instructions Manual

Page: 57 / 150

Control with the OP3000 control panel
Operating Instructions 650-16 - 02.0 - 08/2016 55
Fig. 31: Edit mode
2. Use

/

to select the program to be edited, the sleeve side
and the step; and use

/

to deselect them.
Information
The step to be edited can also be selected using the knee switch.

The selected step is shown bold in the program bar.
3. Use

/

to select the parameter to the changed for the res-
pective step, and use

/

to change it.
5.7.1 Changing further parameters for the current
step
To change further parameters for the current step:
1. Use

/

to select the field .
2. Press the OK key.

The submenu opens.
3. Use

/

to select the desired parameter.
4. Press the OK key to activate or deactivate the parameter, or
use

/

to change its value and press OK to confirm it.