Dürkopp Adler 650-16, Operating Instructions Manual

Page: 81 / 150

Control with the OP7000 control panel
Operating Instructions 650-16 - 02.0 - 08/2016 79
To correct the fullness temporarily until the next sewing step:
1. Select the type of fullness.

The type of fullness selected is displayed in an activated
control field within the symbol.
2. If a higher or lower degree of fullness is required, use the
arrow keys to display more buttons.
3. Input the fullness using the buttons 0 to 16 .
Information
The fullness value remains active until the next sewing step.
AUTO mode Correcting the fullness ratio
The fullness ratio can be set either by the buttons + F% and - F%
or the fullness correction parameter.
Fig. 51: Correcrting the fullness ratio
To correct the fullness ratio:
1. Input the correction value for the fullness in percent.