manualshive.com logo in svg

DuraTech Industries HAYBUSTER CMF-590, Operating Instructions And Parts Reference, Page: 47 / 110

Share
Download
DuraTech Industries HAYBUSTER CMF-590 Operating Instructions And Parts Reference Download Page 47

37

  C M F - 5 9 0    

O P E R A T I N G   I N S T R U C T I O N S

Appendix A:  Warranty

DuraTech Industries International Inc., warrants to the original purchaser for one year from purchase date that this 

product will be free from defects in material workmanship when used as intended and under normal maintenance and 

operating conditions.  This warranty is limited to the replacement of any defective part or parts if DuraTech Industries is 

notified within thirty (30) days of failure.

DuraTech Industries International Inc. uses RR planetary gear boxes in all CMF machines. The planetary gear boxes 

carry a two year parts and labor warranty through DuraTech Industries International Inc.

BIMA two speed gear boxes are covered under the DuraTech Industries International Inc. standard one year warranty

This warranty shall become void if in DuraTech Industries International, Inc’s., judgment the machine has been subject 

to misuse, negligence, alterations, damaged by accident or lack of required maintenance, or if the product has been used 

for a purpose for which it was not designed for.

All claims for warranty must be made through the dealer which originally sold the product and all warranty adjustments 

must be made through same.

This warranty does not apply to tires or bearings or any other trade accessories not manufactured by DuraTech 

Industries International Inc.’s.  Buyer must rely solely on the existing warranty, if any, of these respective manufactures.

DuraTech Industries International Inc., shall 

not

 be held liable for damages of any kind, direct, contingent, or 

consequential to property under this warranty.  DuraTech Industries International Inc., cannot be held liable for any 

damages resulting from causes beyond its control.  DuraTech Industries International Inc., shall 

not

 be held liable under 

this warranty for loss of crops, or rental costs or any expense or loss for labor or supplies.

DuraTech Industries International Inc., reserves the right to make changes in material and/or design of this product at 

any time without notice.

All other warranties made with respect to this product, either expressed or implied, are hereby disclaimed by DuraTech 

Industries International.

Summary of Contents for HAYBUSTER CMF-590















































































































Reviews:

No comments