DuraTech Industries HAYBUSTER CMF-590 Operating Instructions And Parts Reference Download Page 17

Page: 17 / 110

C M F - 5 9 0

O P E R A T I N G I N S T R U C T I O N S

WARNING:

Risk of eye injury

Eye Protection required

6500487

WARNING:

Moving parts can crush and cut.

Keep hands clear.

6500488

WARNING:

Noise hazzard.

Ear protection required.

6500489

WARNING:

NO STEP

DO NOT STEP, STAND, OR SIT ON THIS SURFACE.

MAY CAUSE INJURY AND/OR EQUIPMENT DAMAGE.

6500490

6500322

CAUTION:

1. ADJUST TRACTOR DRAWBAR SO THAT THE

DISTANCE FROM THE END OF THE P.T.O. SHAFT

ON THE TRACTOR TO THE CENTER OF THE

DRAWBAR HITCH PIN IS 16”.

2. ADJUST THE HITCH CLEVIS SO THE MACHINE IS

PARALLEL WITH THE GROUND WHEN HITCHED

TO TRACTOR.

3. HITCH MACHINE TO TRACTOR WITH A 1” HITCH

PIN AND SECURE TO PREVENT LOSS.

4. ADJUST PTO BEARING BRACKET SO THE SHAFT

ON THE MACHINE IS LEVEL WITH THE

PTO SHAFT ON THE TRACTOR.

•

Replacement decals can be purchased from your Haybuster dealer.

Summary of Contents for HAYBUSTER CMF-590















































































































Search results

Summary of Contents for HAYBUSTER CMF-590

Reviews:

DuraTech Industries HAYBUSTER CMF-590, Operating Instructions And Parts Reference, Page: 17 / 110

Search results

Summary of Contents for HAYBUSTER CMF-590

Reviews: