manualshive.com logo in svg

DuraTech Industries HAYBUSTER CMF-590, Operating Instructions And Parts Reference, Page: 14 / 110

Share
Download
DuraTech Industries HAYBUSTER CMF-590 Operating Instructions And Parts Reference Download Page 14

4

  C M F - 5 9 0    

O P E R A T I N G   I N S T R U C T I O N S

Clothing must be sturdy and snug‑fitting, but allow complete freedom  of movement. 

Avoid loosefitting jackets, scarfs, neckties, jewelry, flared or cuffed pants, unconfined 

long hair or anything that could become entangled with the machine.

Protect your hands with gloves when handling flail and sections. Heavyduty, nonslip 

gloves improve your grip and protect your hands.

Good footing is most important. Wear sturdy boots with nonslip soles. Steel-toed safety 

boots are recommended.

To reduce the risk of injury to your eyes never operate a 

CMF-590 VERTICAL MIXER 

unless wearing goggles or properly fitted safety glasses with adequate top and side 

protection.

Tractor noise may damage your hearing. Always wear sound barriers (ear plugs or ear 

mufflers) to protect your hearing. Continual and regular users should have their hearing 

checked regularly.

1.2  Operator - personal equipment

THE OPERATOR

Physical Condition

You must be in good physical condition and mental health and not under the influence of any substance (drugs, alcohol) 

which might impair vision, dexterity or judgment.

Do not operate a 

CMF-590 VERTICAL MIXER

 when you are fatigued. Be alert - If you get tired while operating 

your 

CMF-590 VERTICAL MIXER, 

take a  break.  Fatigue may result in loss of control.  Working with any farm 

equipment can be strenuous.   If you have any condition that might be aggravated by strenuous work, check with your 

doctor before operating

Proper Clothing

Summary of Contents for HAYBUSTER CMF-590















































































































Reviews:

No comments