DuraTech Industries HAYBUSTER CMF-590, Operating Instructions And Parts Reference, Page: 28 / 110

18 C M F - 5 9 0 O P E R A T I N G I N S T R U C T I O N S
3.2.10 Two-Speed Gearbox (Option)
The two-speed gearbox is available on the CMF-590 for operators who want more control of their mixing speeds,
want to reduce overall horsepower requirements, or prefer to turn off mixer while transporting a loaded mixer. The
two-speed gearbox has two speeds, low and high. Pictures in
Section 6.5,
show lever in two positions in both gear
selections.
3.2.11 Extension Conveyor Spouts (Option)
Spouts are available with or without magnets. Spouts are adjustable in three hole positions on sides. Point spout down
further when running the conveyor extensions at higher angles to avoid material build up on the end of the conveyor.
When running conveyor at lower angles, direct spouts so that the magnets are positioned further into the flow of
material. Pictures of available spouts can be found in Sections 6.2 and 6.3 .
3.2.12 Setting Chain Tension on Side Conveyors (Single Auger Machines)
Tension the chain assemblies while the conveyor is running. Turn the tensioning nut compressing the spring until the
spring is flush with the key attached to the side of the spring cup. Set the other side. After both springs are maintaining
constant compression at the end of the keys, lock the jam nuts.
key
spring
jam nuts