manualshive.com logo in svg

DuraTech Industries HAYBUSTER CMF-590, Operating Instructions And Parts Reference, Page: 23 / 110

Share
Download
DuraTech Industries HAYBUSTER CMF-590 Operating Instructions And Parts Reference Download Page 23

13

  C M F - 5 9 0    

O P E R A T I N G   I N S T R U C T I O N S

Section 3: Operation

To insure long life and economical operation, we highly recommend the operator of the CMF-590 be thoroughly 

instructed in the maintenance and operation of the machine.  There is no substitute for a sound preventative maintenance 

program and well trained operator.

Prior to starting the engine of the tractor, we recommend the operator make a visual inspection of the unit.  This can be 

done as the lubrication is being carried out.  Any items that are worn, broken, missing or needing adjustment must be 

serviced accordingly before operating the CMF-590. 

3.1 Pre-starting inspection instructions

WARNING:

 Before inspecting the machine, use the normal shut-down procedure in Section 3.11

.

Check the following:

q

  Hydraulic components for leaks or damage.

Warning: 

 Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient 

force to penetrate the skin.  When searching for suspected leaks, use a piece of wood or cardboard 

rather than your hands.  If injured, seek medical attention immediately to prevent serious infection or 

reaction.

q

  Check for loose bolts, worn or broken parts.

q

  Lug nuts for tightness. Torque to 320-457 ft lbs. (44-63 kgm)

q

  Condition of tire rims.

q

  Tires for proper air pressure. 130 PSI (900 kPa) cold

q

  Installation and condition of shields.

q

  Installations of slow moving vehicle (SMV) sign if required.

q

  Condition of decals.

q

  Gearbox oil levels.

Summary of Contents for HAYBUSTER CMF-590















































































































Reviews:

No comments