computer radio control system
EN
4.
4.
1.
Switch & Stick Type
The first menu line item lists the control’s number and the second
item lists the type of control element. Using the
“F2”
and
“F3”
function buttons you can scroll through channels, with the
“F5 (Ok)”
button you can exit the menu screen.
By default, the switch types are always automatically detected,
however, it is also possible to overwrite any of the auto-detected
switch types with a user-defined type. The choices are:
"
Auto
"
which
keeps the auto-detection running,
"
None
"
that disables the
particular input control, standard
"
Std. Switch
"
,
"
3-Pos. Switch
"
,
"
Button
"
and
"
Proportional
".
Any value other than Auto will disable
auto-detection for the specified control. Remember, these settings
are global and are applied to all models. The only model-specific
"
Type of control
"
property applies to stick-switches
Sk
and
Sl
. This
feature is useful, for example, if you want to have a standard switch
that behaves like a spring loaded switch equipped with button
memory.
2.
Switch ON/OFF Points
Any proportional function can be set as a system switch. This menu
item enables you to assign the travel percentage at which a desired
function can be turned ON or OFF.
“Switch-ON”
– The point when the control element positon will
switch a function ON.
“Switch-OFF”
– The point when the control element positon will
switch a function OFF.
By default, the system setting for all proportional channels and for all
inputs is set to function the same as a 3-position switch.
a)
A function above this point is considered to be
“Switch ON”
b)
A function in this range (middle) can be considered to be either
“Switch ON”
or
“Switch OFF”
c)
A Function below this point is considered to be
“Switch OFF”
If the switch setting is set at same level for
“Switch ON”
and
“Switch
OFF”
, the proportional channel/function output will be the same as
a 2-position switch.
3.
Required Preflight Position
For any functions assigned to the Switch, Knob or Stick, any preflight
initial position can be programmed. If the pre-programed Switches,
Knobs or Sticks are not in required preflight position while model is
being activated, system will refuse to switch to this model. The
transmitter screen will display the function that is not in
preprogrammed, correct preflight position.
4.
Function Status Display
Position and status of the control is displayed in the status bar. On
the right side of this menu you can see the status of the switch
function as an “x” or check mark.
1) Setting Example
If you have installed the optional a button/switch in your left or right
stick, scroll thru the Control No. Menu line and pick the function
switch
“Sk”
or
“Sl”
if the button switch is installed in your right stick.
Pick one of the
“Type of Control”
switch options:
•
“2-Position Switch”
•
“3-Position Switch”
•
“Button”
For any functions assigned to the chosen switch, knob or stick, any
preflight initial position can be programmed.
87
Summary of Contents for Jeti DS-12
