Duplex Jeti DS-12, Manual

Page: 21 / 151

computer radio control system EN
4.4 Swappable and Assignable Switches
One of the most important features of a JETI transmitter is the switch
function assignment flexibility. The exact type of switch can be set in
„menu->advanced->properties->sticks-switches->setup” . There
are many switches available to suit different needs. See your Jeti
retailer for switch availability.
You may either swap the existing switches around or take advantage
of the optional accessories and create your own custom
configuration.
Factory Switch Configuration for the DS-12 Transmitter
Sa - 3 - position short switch
Sb - 2 - position long switch
Sc - 2 - position long switch
Sd - 2 - position long switch
Se - 3 - position long switch
Sf - 2 - position short switch
2. 2.
4.4.1 Switch Removal Procedure
1. Switch off the transmitter and remove the 7 screws that secure
the radio back cover. Next, remove the radio back cover.
Be sure to disconnect the transmitter battery pack
connector.
2. With the specialized wrench (not included) carefully loosen and
remove the switch installation nut.
3. Hold the switch from the back side of the transmitter and pull it
towards you, so that the switch is released from the body of
transmitter.
2
2
3
21