Duplex Jeti DS-12, Manual

Page: 90 / 151

computer radio control system EN
Double Path Wireless Mode
a) Mode Selection.
b) Primary module bind control menu line
c) Secondary module bind control menu line
d) Optional signal loss alarm settings.
Trainer Mode with t wo JETI DS/DC Radios
Make sure that the instructor’s transmitter is bound to the 1.
aircraft in the “Default” wireless mode and that all flying
surfaces are functioning properly.
Change the instructor’s transmitter (DS/DC-14/16/24) wireless 2.
mode to “Teacher” and authorize the secondary TX module to
bind with the student’s transmitter.
Switch ON the student’s transmitter (DS-12), change its wireless 3.
mode to “Student” and allow the instructor’s transmitter to
bind properly. Verify that all of the aircraft’s surfaces are
correctly controlled by the student’s transmitter. If they are not
correct, make the necessary changes in the student’s
transmitter.
Trainer Mode for JETI DS -12 as the Instructor Radio
Other brands of transmitters can be used by the student with a JETI
Duplex EX 2.4GHz radio system by using a PPM cable for
communication with DS-12 transmitter.
1. Make sure that the instructor’s transmitter is bound to the
aircraft in the “Default” wireless mode and that all flying
surfaces are functioning properly.
C h a n g e t h e i n s t r u c t o r ’s t r a n s m i t t e r m o d e t o 2.
“Teacher” and connect the PPM signal from the "Student"
transmitter to the DS-12 PPM input (Jack) .
Verify that all of the aircraft’s surfaces are correctly controlled by 3.
the student’s transmitter. If they are not correct, make the
necessary changes in the student’s transmitter.
4. 4.
a
b
c
d
90