Spin Welder User’s Manual
Section 6 – Control Functions
Page 41
Page 40
Dukane Manual Part Number 403-547-03
Dukane Manual Part Number 403-547-03
palm switches activate the spin welder, the display
also indicates
IN CYCLE
in green. These indicators
are shown in Figure 6–4.
Pneumatic Controls
Air Pressure Regulator
The air pressure regulator is located on the front
panel of the Spin Welder and is shown in Figure 6–5.
The pressure regulator knob is a ten–turn control.
About five turns are required to change the setting
from 0 to 100 psi (6.9 bar). Turning the knob clock-
wise increases the pressure.
Regulator Gauge
The applied air pressure is indicated on the regulator
gauge located directly above the regulator control
knob. The gauge has a 1.5” diameter dial with a
range of 0 to 100 psi (0 to 7 kg/cm
2
) and is shown
in Figure 6–5.
Figure 6–5
Front Panel Controls, Display and Gauge
Pressure
Regulator
Pressure
Gauge
Downspeed
Adjustment
Lock
Ring