Spin Welder User’s Manual
Section 3 – Safety
Page 15
Page 14
Dukane Manual Part Number 403-547-03
Dukane Manual Part Number 403-547-03
Safety Regulations
Plastics Health Notice
Before using any Dukane plastic welding system,
make sure you are familiar with applicable regula-
tions regarding the particular type(s) of plastic you
are using. In the USA, check with the U.S. Depart-
ment of Labor.
When plastic materials are being processed, they
may emit fumes and/or vapors that could be haz-
ardous (e.g. PVC – Polyvinyl Chloride can emit
chlorine gas under certain processing conditions).
Make sure you use proper ventilation whenever
these plastics are processed.
Palm Switches
The dual safety palm switches comply with OSHA
safety regulations. Using a foot switch in place of
the dual palm activation buttons violates OSHA
regulations.
General Safety
Before performing any maintenance or service on
the Spin Welder, locks and tags should be applied
to all energy isolating switches. Anything that might
restore energy to the Spin Welder must be locked
out.
You may be required to add accessories to bring the
system into compliance with applicable regulations
for operator safety. In the United Sates, these regu-
lations are administered by OSHA (Occupational
Safety and Health Administration).
Do not make any unauthorized modifications to the
Spin Welder or base. Unauthorized modifications
could cause equipment damage and injury to the
operator. In addition, unauthorized modifications
will void the equipment warranty.
