Spin Welder User’s Manual
Section 7 – Operational Setup
Page 59
Page 58
Dukane Manual Part Number 403-547-03
Dukane Manual Part Number 403-547-03
NOTE
A flashing black box
(on the second line
to the right of the
current data) in the
display prompts you
to enter the data for
the specified param-
eter. When you have
entered the desired
data using the num-
ber and decimal point
keys, press the Enter
key as shown. If you
wish to use the cur-
rent data, just press
the Enter key. The
Enter key needs to
be used for all data
except for the initial
Menu selection.
1=WELD BY DIST.
2=WELD BY TIME
PUSH ESTOP
TO BEGIN SETUP
SET BOTTOM STOP
1=BYPASS
STOP SET
1=PRELOAD
2=PRESPIN
PART PICKUP?
1=YES 2=NO
SET MAX. TIME
LIMIT 1.50
SET WELD TIME
.75
SET HOLD TIME
.50
SET HOLD TIME
.50
1=RUN 2=SETUP
3=MODIFY
1=RUN 2=SETUP
3=MODIFY
SET PICKUP TIME
1.00
SET PRELOAD
TIME .25
SETUP
Menu
Push Emergency OFF
Button In
Turn Counterbalance Regulator
CCW To Allow Motor To Drop
Down To Limit Stop
Turn Counterbalance Regulator
CW To Allow Motor To Rise
Back Up Into Press
Enter Desired Value
Then Press ENTER
MENU
1
2
1
1
2
1
2
2
Figure 7–8
SETUP Menu Flowchart
