Spin Welder User’s Manual
Section 3 – Safety
Page 17
Page 16
Dukane Manual Part Number 403-547-03
Dukane Manual Part Number 403-547-03
Follow the installation instructions to ensure the
Spin Welder is properly installed. Do not operate
the Spin Welder until after it has been properly and
securely installed.
Electrical Safety
AC Power
For safety and reliability, the power cords on the
Dukane Spin Welder have a grounded Twist–Lock
NEMA configuration plug. This should be connected
to a NEMA L15–20R configuration receptacle (see
Figure 2–2).
The AC power switch has a provision to lockout
the handle in the OFF position during any mainte-
nance or servicing. The cover can also be locked to
prevent unauthorized access. Figure 3–1 shows the
AC power switch and the two lockouts. Before per-
forming any service or tests, turn off the AC power
switch, disconnect the AC power cord from the AC
receptacle and lock the switch handle in the OFF
position. Never attempt to lockout the AC power
by pulling the fuses.
WaRninG
Always turn the AC power
OFF before opening the AC
switch enclosure. Discon-
nect the AC power cord
and lockout the switch
handle before perform-
ing any tests or maintenance on
the fuses. The voltage inside the
enclosure is dangerous.
Always lockout the compressed air
before performing any electrical
maintenance or service.
Cover Lockout
Switch Lockout
Figure 3–1
AC Power Enclosure, Switch and Lockouts
