Dukane 8970WUSS User Manual Download Page 117

Page: 117 / 136

117

QM00481-1

Maintenance

►Make sure the power cord is not plugged in, and allow the

SURMHFWRUWRFRROVXႈFLHQWO\

. The high temperature state of the projector could

cause a burn and/or malfunction to the projector.

►Do not clean or service the inside of the projector. Doing is so dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result in

a ﬁre, an electric shock, and/or malfunction to the projector.

• Do not put anything containing water, cleaners or chemicals near the projector.

• Do not use aerosols or sprays.

WARNING

►Incorrect care of the projector could cause not only an injury

but adverse inﬂuence such as discoloration, peeling paint, etc.

►Do not use cleaners or chemicals other than those speciﬁed in this manual.

►Do not polish or wipe with hard objects.

NOTICE

►Do not directly touch the lens surface with hands.

CAUTION

UQWKHSURMHFWRURႇDQGXQSOXJWKHSRZHUFRUG

Allow the projector to cool

VXႈFLHQWO\

After making sure that the projector is cool adequately, lightly wipe with gauze

or a soft cloth.

If the projector is extremely dirty, dip a soft cloth in water or a neutral cleaner

diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a

soft, dry cloth.

Incorrect care could have adverse inﬂuence such as discoloration, peeling paint,

etc.

Caring for the cabinet and remote control

Summary of Contents for 8970WUSS









































































































































Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands

Dukane 8970WUSS, User Manual

Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands