49
QM00481-1
Operating
Press the
FREEZE
button on the remote control.
The “FREEZE” indication appears on the screen
(however, the indication does not appear when the
OFF is selected for the OSD MESSAGE item in
the SETUP (
78
), and the projector goes into the
FREEZE mode, which the picture is frozen.
To exit the FREEZE mode and restore the screen to normal, press the
FREEZE
button again.
Temporarily freezing the screen
• The projector automatically exits from the FREEZE mode when some
control buttons are pressed.
• If the projector continues projecting a still image for a long time, the LCD
panel might possibly be burned in. Do not leave the projector in the FREEZE
mode for too long.
• Images might appear degraded when this function is operated, but it is not a
malfunction.
NOTE
INFO
NETWORK INTERACTIVE
FREEZE
button
Press the
SHUTTER
button on the control panel.
/LJKWVRXUFHRXWSXWLVWXUQHGRႇ5HIHUWR
"Regarding the indicator lamps" (
122
) about the
indicator when the shutter is closed.
To open the shutter and restore the screen, press
the
SHUTTER
button again.
Temporarily shading the screen
•
7KHSURMHFWRUWXUQVRႇDXWRPDWLFDOO\ZKHQWKHWLPHVHWXSE\WK
e
SHUTTER TIMER passes (
89
).
:KHQWXUQLQJRႇWKHSRZHUE\WKHQRUPDOSURFHGXUHWKH
shutter opens
automatically.
NOTE
►If you want a blank screen while the light source is lit, use the
shutter function above or the AV MUTE function (
33
). Any other action may
cause the damage on the projector.
CAUTION
SHUTTER
button
