Dukane 8970WUSS User Manual Download Page 46

Page: 46 / 136

QM00481-1

Operating

3.3 Adjusting Cropping Area

Adjust the Cropping Area when cutting out a part of input image.

Select SETUP with ▲/▼ buttons and press ►,

ENTER

INPUT

button.

* MODE is set to [OFF] temporarily and the guide of the Cropping Area

is displayed.

Select [LT]/[WH] with ▲/▼ buttons and press the

ENTER

INPUT

button.

Move the guide display with ▲/▼/◄/► buttons to select the region of the

screen to be cut out.

Press the

ENTER

INPUT

button and then press ◄ button to select SETUP,

and MODE switches to ON automatically.

(continued on next page)

3.4 Adjust Cropping Area of the other projector.

Set the Cropping Area of the other projector with the same value as one

projector.

The input image is automatically cut out according to the settings of the

Blending Region.

* To keep input image from not being seen while setting up, set BLANK to ON.

Input Image

Cropping

Input Image

Cropping

Summary of Contents for 8970WUSS









































































































































Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands

Dukane 8970WUSS, User Manual

Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands