Dukane 8970WUSS User Manual Download Page 75

Page: 75 / 136

QM00481-1

SETUP menu

Item

Description

PICTURE

POSITION

Using the ▲/▼/◄/► cursor buttons selects the required picture

position.

The PICTURE POSITION is not changed if any of the following

cases apply.

・

There is no non-display area (black display or background display)

or it is not displayed on the screen.

• One of the following messages is displayed on the screen:

"NO INPUT IS DETECTED"

"SYNC IS OUT OF RANGE"

"INVALID SCAN FREQ."

• The BLANK or TEMPLATE function is selected.

INSTALLATION

Pressing the ►button displays the dialog for changing the

INSTALLATION setting.

FRONT / DESKTOP

REAR / DESKTOP

REAR / CEILING

FRONT / CEILING

Use the ▲/▼ buttons to select the required setting on the

INSTALLATION dialog, and press the

ENTER

button of the remote

control or the

INPUT

button of the projector to execute.

If TRANSITION DETECTOR is ON and the INSTALLATION status

is changed, the TRANSITION DETECTOR ON alarm (

109

) is

displayed when the projector is restarted.

(continued on next page)

Summary of Contents for 8970WUSS









































































































































Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands

Dukane 8970WUSS, User Manual

Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands