Dukane 8970WUSS User Manual Download Page 122

Page: 122 / 136

122

QM00481-1

Regarding the indicator lamps

Regarding the indicator lamps (continued)

Indicator Status

Description

At least 1 "Power ON" schedule is saved to the

projector.

Refer to

Schedule Settings

section of

User’s

Manual - Network Guide.

STANDBY MODE is set to QUICK START.

Refer to STANDBY MODE.

(

)

Blank(black) or AV Mute(black) is on.

Press any button on the remote control or on the

control panel to disable Blank or AV Mute.

The shutter is closed.

Press the

SHUTTER

button on the remote control or

on the control panel to open the shutter.

The projector received the remote control

signal when ALL is selected for REMOTE

CONTROL in KEY LOCK.

CONTROL PANEL was operated when ALL is

selected for CONTROL PANEL in KEY LOCK.

(continued on next page)

Blinking In Green 1 time

Normally lighting in Orange.

Blinking In Green 2 times for

approx. 3 seconds.

Blinking In Green 2 times

Green

Blinking In Green 3 times

Green

Summary of Contents for 8970WUSS









































































































































Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands

Dukane 8970WUSS, User Manual

Search results

Summary of Contents for 8970WUSS

Reviews:

Related manuals for 8970WUSS

Brands by name

Popular brands