Ducati PANIGALE V4 2022 Owner'S Manual Download Page 50

Page: 50 / 310

Maintaining the battery charge

Attention

The electric system of this motorcycle is

designed so as to ensure there is a very low power

drain when the motorcycle is OFF. Nevertheless, the

battery features a certain self-discharge rate that is

normal and depends on ambient conditions as well

as on "non-use" time.
If battery is not kept at a minimum charge level by

the battery charger / charge maintainer, battery

could get damaged if voltage drops under 8 V.

Connector (1) is located under the rider seat (2), on

the left side.

To reach it, remove the two screws (3) on both sides

and remove the rider seat (2).

Attention

Use only the Ducati-approved battery charger

(A) for lithium batteries also as a maintainer.

Do not use the battery charge maintainer kit part no.

69924601A (various countries) or battery charge

maintainer kit no. 69924601AX (for Japan, China and

Australia only), as it is specific for lead batteries.
Connect the maintainer to the diagnostics socket (1).

Fig 26

Fig 27

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands