Ducati PANIGALE V4 2022 Owner'S Manual Download

Page: 106 / 310

Change Riding Mode as follows:

●

Press and hold the MODE/ENTER button (3) for

a long time.

System opens the page from which it is possible

to scroll the available Riding Modes and view

their parameters, together with the relevant

settings.

●

With buttons (1) and (2) it is possible to select the

desired Riding Mode.

●

Press the MODE/ENTER button (3) to confirm.

Select "Exit" and press the MODE/ENTER button (3)

to quit the Riding Mode change function without

making any changes.
As soon as the new Riding Mode is confirmed, the

instrument panel checks the following conditions:

●

If speed is lower than or equal to 5 km/h (3 mph)

and throttle control is open, the message “Close

throttle” is displayed; the new Riding Mode is

confirmed and stored only when throttle control

is closed and the main screen is displayed.

●

If speed is lower than or equal to 5 km/h (3 mph),

throttle control is closed but brakes are

actuated, the message “Release brakes” is

displayed; the new Riding Mode is confirmed

and stored only when brakes are released and

the main screen is displayed.

●

If both the previously specified conditions are

true, message “Close throttle and release

brakes” is displayed; the new Riding Mode is

confirmed and stored only when the 2

conditions are as required and the main screen is

displayed.

If either of the conditions required to validate the

change of Riding Mode are not true within 5 seconds

from activation of one of the above-described

conditions, the procedure will be aborted, the

Fig 63

105

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands