Ducati PANIGALE V4 2022 Owner'S Manual Download

Page: 260 / 310

Note

This is the procedure specified by Italian

regulations for checking the maximum height of the

light beam. Please adapt said procedure to the

provisions in force in your own country.
To align the headlight beam, turn the screws (1) and

(2) located at the front of the vehicle, on both sides.
Screw (1), positioned on the left side, acts on the high

beam:

●

turn clockwise to lower the light beam;

●

turn counter clockwise to raise the light beam.

Screw (2), positioned on the right side, acts on the

low beam:

●

turn clockwise to lower the light beam;

●

turn counter clockwise to raise the light beam.

Attention

The headlight might fog up if the motorcycle is

used under the rain or after washing. Switch

headlight on for a short time to dry up any

condensate.

Fig 206

Fig 207

259

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands