Ducati PANIGALE V4 2022 Owner'S Manual Download

Page: 248 / 310

Refitting the battery

Position the battery in its seat.

Lay down the ABS positive cable (12), onto positive

cable (11) and start screw (8) on these cables.

Lay down the engine ground cable (10), onto

negative cable (9) and start screw (8) on these cables.

Tighten the terminal retaining screws (8).

Apply grease around the battery terminals to

prevent oxidation.

Orient the cables as indicated.

Attention

The battery gives off explosive gases; never

cause sparks or allow naked flames and cigarettes

near the battery. When charging the battery, ensure

that the working area is properly ventilated.

Fig 192

Fig 193

247

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands