Ducati PANIGALE V4 2022 Owner'S Manual Download Page 167

Page: 167 / 310

The following table indicates the most suitable level of DTC intervention for the various riding modes, as

well as the default settings in the “Riding Mode” that can be selected by the rider:

DTC

RIDING MODE

CHARACTERISTIC

DEFAULT

OFF

The DTC is disabled.

TRACK Professional

This level is designed for exclusive track

use, for very expert riders.

In this mode, the DTC allows side slip‐

ping.

TRACK

This level is designed for exclusive track

use and for very expert riders. It is op‐

timised for OEM tyres.

In this mode, the DTC allows side slip‐

ping.

SPORT / TRACK

This level is designed for track use and

for expert riders.

In this mode, the DTC allows side slip‐

ping.

It is the default level for the

"RACE A" and "RACE B” Riding

Modes.

SPORT / TRACK

This level is designed for track use (and

road use, for expert riders).

SPORT

This level is designed for riding on the

road or on the track, consistent with

ENGINE LOW operation.

It is the default level for the

"SPORT" Riding Mode.

166

Summary of Contents for PANIGALE V4 2022























































































































































































































































































































Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands

Ducati PANIGALE V4 2022, Owner'S Manual

Search results

Summary of Contents for PANIGALE V4 2022

Reviews:

Related manuals for PANIGALE V4 2022

Brands by name

Popular brands